PWM to Voltage Converter Module 0-5V / 0-10V
- Brand:
- China
- Product Code:
- 2018-1-739
- Availability:
- 28
- Reward Points:
- earn 1 points (1.00 ₺)
141.76 ₺
With Bank Transfer
%5 off
134.67 ₺
Ex Tax: 118.13 ₺
- Same-Day Shipping For orders placed by 15:00
- Free Shipping On orders over 3000 TL
- Easy Returns 14-day right of return
-
Secure Payment 256-bit SSL protected
PWM to Voltage Converter Module 0-5V / 0-10V
The LC-LM358-PWM2V module converts PWM digital signals into 0-10 V analog signals. It can be used as a signal interface switch for PLC or other industrial control boards.
Technical Specifications
| Module Code | LC-LM358-PWM2V |
| Function | Converts PWM digital signals into 0-10 V analog signals |
| Application | Signal interface switching for PLC or industrial control boards |
| Output Voltage Adjustment | Adjusted by setting the PWM duty cycle |
| Technology | Embedded MCU |
| Operating Voltage | DC 12 V-30 V (>100 mA) |
| PWM Receiver Frequency | 1 kHz-3 kHz |
| PWM Signal Input Level Selection | Selected via short circuit (jumper) |
| PWM Signal Input Level (Jumper 5V) | 4.5 V to 10 V peak, suitable for normal controllers or 5 V MCU |
| PWM Signal Input Level (Jumper 24V) | 12 V to 24 V peak, suitable for normal PLC controllers |
| Conversion Range | 0% - 100% PWM input, 0-10 V output |
| Permissible Error | 5% |
| VCC | DC 12 V-30 V |
| GND | Ground |
| PWM | Positive terminal of the PWM input signal |
| GND (input) | Input signal negative |
| VOUT | Output voltage 0-10 V |
| GND (output) | Output voltage ground |
| Output at Power-On | When there is no input signal, the output is 0 V |
| Calibration Method | Apply a PWM signal with 50% duty cycle (frequency 1 kHz-3 kHz), adjust the potentiometer so that the multimeter reads 5.00 V between VOUT and GND. |
| On Frequency Change | Calibration may be required when the frequency changes. |
| Accuracy Adjustment | Can be controlled by adjusting the potentiometer. |
Package Contents
- 1 x PWM Voltage Converter Module 0-5V 0-10V
