1200W DC-DC Boost Step-Up Converter Module 8-60V to 12-83V 20A
- Product Code:
- 2018-2-522
- Availability:
- 7
- Reward Points:
- earn 9 points (9.00 ₺)
950.64 ₺
With Bank Transfer
%5 off
903.11 ₺
Ex Tax: 792.20 ₺
- Same-Day Shipping For orders placed by 15:00
- Free Shipping On orders over 3000 TL
- Easy Returns 14-day right of return
-
Secure Payment 256-bit SSL protected
1200W DC-DC Boost Step-Up Converter Module 8-60V to 12-83V 20A
The 1200W DC-DC boost step-up converter module converts an 8-60 V input voltage to an adjustable output voltage. With a maximum output current of 20 A, high conversion efficiency and a large heat sink design, it is suitable for various power supply applications.
Technical Specifications
| Heat Sink Dimensions | 116 x 52 x 15 mm |
| Input Voltage | 8-60 V |
| Input Current | 20 A |
| Quiescent Current | 15 mA |
| Output Current | 20 A max. (increase heat dissipation above 15 A; depends on input and output voltage, higher voltage results in lower output current) |
| Constant Current Range | 0.5-20 A |
| Output Power | Output power = input voltage x 20 A; e.g. 12 V x 20 A = 240 W, 24 V x 20 A = 480 W, 36 V x 20 A = 720 W, 48 V x 20 A = 960 W, 60 V x 20 A = 1200 W |
| Operating Temperature | -40 to 85 °C (increase heat dissipation if ambient temperature is too high) |
| Operating Frequency | 150 kHz |
| Conversion Efficiency | Up to 95% (efficiency depends on input/output voltage and current) |
| Mounting | 4 x 3 mm screws |
| Module Dimensions | 130 x 52 x 46 mm / 5.12 x 2 x 1.8 in (L x W x H) |
| Module Weight | 257 g / 9.07 oz |
Applications
- DIY power supply: 12 V input, adjustable output voltage
- Power supply for electronic devices
- Car power supply for laptop, PDA or digital products
- DIY portable power supply with 12 V high-capacity lithium battery
- Solar panel regulator
- Battery and lithium battery charging
- Driving high-power LED lights
Notes
- The circuit structure of the boost module cannot be adjusted through short circuit.
- The product input power supply voltage must be above 8 V.
- When used as a power supply input, first operate the product with no load and set the input power and output voltage, then connect the load (make sure the switching power supply is operating).
- When used to adjust voltage in constant current mode, the constant voltage must be higher than the input voltage; do not use the short-circuit output current path.
- If the input voltage fluctuation range is lower than the set output voltage, the output voltage is stable; ensure that the input voltage is lower than the output voltage.
