Adjustable Time Delay Relay Module DC 6-30V
- Brand:
- China
- Product Code:
- 2018-1-756
- Availability:
- 6
- Reward Points:
- earn 2 points (2.00 ₺)
234.53 ₺
With Bank Transfer
%5 off
222.80 ₺
Ex Tax: 195.44 ₺
- Same-Day Shipping For orders placed by 15:00
- Free Shipping On orders over 3000 TL
- Easy Returns 14-day right of return
-
Secure Payment 256-bit SSL protected
Adjustable Time Delay Relay Module DC 6-30V
Time delay relay module with 6-30V DC supply, 3-24V trigger signal, and 7 selectable programs. It can be powered via micro USB or terminal block.
Technical Specifications
| Specification | Value |
|---|---|
| Supply | 5V via micro USB input or 6-30V DC via terminal block |
| Trigger signal voltage range | 3-24 V |
| Time setting ranges | 0-99.9 seconds, 0-999 seconds, 0-999 minutes |
| Default time setting range | 0-999 seconds |
| Timer count direction | Counts up from 0 |
| On power loss | Program setting remains in memory, time resets and waits for trigger |
| Number of programs | 7 |
| Program names | P1.1, P1.2, P1.3, P2, P3.1, P3.2, P4 |
| User manual | Shipped as a printed document with the product |
Symbols and Meanings
- OP (Operating): Symbolizes the relay operating time.
- CL (Closing): Indicates the relay's closed (off) time.
- LOP (Loop): Indicates how many times the selected action will repeat; if "---" is selected, it runs indefinitely.
- CP: Sleep mode (not active in this module).
- OD: Always open.
Program Selection
To select a program, press and hold the SET button for 3 seconds and release, select the desired program with the UP/DOWN buttons and confirm with SET. To select the time range, press the STOP button after the program is selected.
Program Modes
- P1.1: After trigger is applied, the relay energizes and operates for the set time; when the time expires it releases; does not detect trigger while running.
- P1.2: When trigger is applied, the relay energizes and releases when the time expires; if triggered again while running, the time resets and the relay state remains unchanged.
- P1.3: When trigger is applied, the relay energizes and releases when the time expires; if triggered again while running, the display shows '000' and the relay releases.
- P2: OP and CL times are set; when triggered, it first waits for the CL time, then the relay energizes for the OP time; no automatic repeat; does not detect trigger while running.
- P3.1: OP, CL and LOP times are set; when triggered, it operates for the OP time, remains off for the CL time, and repeats LOP times; if '---' is selected, it loops indefinitely; do not trigger while running.
- P3.2: Same as P3.1; the difference is that after the time settings are saved, it starts operating automatically without waiting for a trigger; do not trigger while running.
- P4: Same as P1.2.
Package Contents
- 1x Adjustable Time Delay Relay Module
Related Products
